New Head ?



No replies to this topic
  • cornbread

Posted July 24, 2002 - 01:51 PM

#1

Thanx to those who have responded to my posts in the past. This site is mucho help.

I posted a topic about a month ago It's Dead.
I've pulled the head off, thought the valve was bent, NOT! It did appear as such, but further investigation reveals that the valve was just stuck. Let me tell you, it was not easy to get the lifter out. I got the lifter out & the valve removed. What I found was that the lifter had a spot on it where the comp. lever hit & gave it a slight pucker. This in turn has worn a ridge down in the head. I tried to fit the other lifter down in,with no valve or spring. would'nt fit.

Has anyone ever heard such a thing?
Can this be fixed?

again thanx to all!





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.