TPS adjustment



5 replies to this topic
  • Shawn_Mc

Posted July 24, 2002 - 08:29 AM

#1

I finally found the little torx with the dimple/hole in the end. 20 bucks and ya gotta buy the whole set. Oh well. I gottem now. Anyway, I played with it a bit last night. It was kinda wierd.
I did this with the engine running so I would know how this was effecting the timing at idle. I rotated it counter clockwise about 3 minutes, and it started idling a lot faster, I continued the same direction and it slowed. So I went the other way with it, it spead back up, and then slowed down again as I moved past that spot, the continued clockwise until the end of the adjustment and no change. All the while I was blipping the throttle to see how it acted. All the way clockwise, it stumbed badly. All the way counter clockwise it stumbled badle. It stumbled a little when really wacked hard at the stock postion. At about 3 minutes counter clockwise from stock, the postion where it idle up, it seemed to not stumble as much when really wacked open. I was also able to turn the idle down for a reasonable idle speed too. I then started to play with the pilot screw after resetting the TPS. I noticed that it smoothed the idle out, when leaned. I also found the engine would idle for about twice as long with out puking out the coolant with these settings. I havent ridden it around the track yet, but up and down the street, it seemed smoother off the bottom.
By the way, my neighbors now love me. The crack of the Thunder Alley at 9pm on a weeknight doesnt seem to bring out the enthusiasm that it should. Its ok, I invited them to my birthday party, I'll fillem with beer and food, they'll forgive :)

  • John_Lorenz

Posted July 24, 2002 - 08:49 AM

#2

Shawn
If your neighbors dont like it send em to my house in Harleyster, They will think your a Prince after they get a sound check here on a week night with the Tophatters anal runs

Looking forward to here about the official ride

[ July 24, 2002: Message edited by: E.G.O.**** ]

  • DaveJ

Posted July 24, 2002 - 09:09 PM

#3

Shawn,

Great post dude, and job well done.

It will be interesting to see what you think on the track and more importantly, the pull on the hills.

DaveJ

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Shawn_Mc

Posted July 24, 2002 - 09:51 PM

#4

If its not too freakin hot, I'll go out on friday afternoon, and track test it.

  • Shawn_Mc

Posted July 26, 2002 - 08:54 PM

#5

Friday night, midnight. Tired as hell. Bike too fast now. must hire pro rider. Mcgrath still looking?

I'll post later when I can feel my fingers better. :)

  • John_Lorenz

Posted July 27, 2002 - 05:45 AM

#6

Too Many Heini's eh Shawn? too Funny





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.