Billet throttle tube?


1 reply to this topic
  • jmw00

Posted June 28, 2004 - 04:44 PM

#1

I am wanting to purchase an oberg twister throttle tube... This is my question. Does anyone know if and how to place rally pro hand gaurds on you bars with a billet throttle tube. I know that on the stock tube i had to drill out a hole or either cut the end off of the tube to place the inserts into the bars. Do you have to do the same with billet throttle tubes? All of my purhchases have to be on the internet (No big shops here :thumbsup:) So i have not looked at one of these tubes up close to see if I can even use the hand gaurds with these throttles

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • The_Blue_One

Posted June 28, 2004 - 06:53 PM

#2

I use these Oberg No cutting required :thumbsup:





Related Content

Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.