Clutch Fix and lever mod

3 replies to this topic
  • XXX_Thumper

Posted June 28, 2004 - 02:13 AM


I've been search for a day and can not find any pics of the 450 clutch fix/arm mod. Also, I want to do the lever mod but also can not find a pic. Does anyone have some? :thumbsup:

  • Satch0922

Posted June 28, 2004 - 02:33 AM


I don't have a pic of the clutch lever mod anymore. Here is how I did it

"just drill the lever out and relocate the cable barrel closer to the pivot point. Made a big difference! I used a 21/64 bit for the main barrel hole, then an 1/8 bit to drill out and smooth the area where the cable pulls through. Careful not to drill the main hole too deep."

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • gonzo

Posted June 28, 2004 - 03:30 AM


I did this what do you want to know? Also I have another actuator I can give you.

  • XXX_Thumper

Posted June 28, 2004 - 08:56 AM


Gonzo, I'll call you tomorrow.

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.