Valve Checking ???

1 reply to this topic
  • Mike_Walsh

Posted July 15, 2002 - 06:59 AM


On a 00 426. I have a few questions that I couldn't find the answer to in a search

1. The cam lobes were to pointing away from each other at TDC the intake was pointed slightly up, even though the punch markes on the gears were lined up. Is this normal?

2. How easly should the gauge slide under? A little force? Should it cause the bucket to move down a little?



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • John_Lorenz

Posted July 15, 2002 - 07:06 AM


To answer your question check out this post


Plus there should be littl or no resistance, you should not have to force the gauge "AT ALL"

[ July 15, 2002: Message edited by: E.G.O.**** ]

Related Content

WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

YZ450F 03 Sparks driving me crazy by SirAttard

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.