Wet Sump back to Dry Sump

3 replies to this topic
  • Diesel_99

Posted June 22, 2004 - 02:07 AM


I picked up a 426 motor with the wet sump conversion on it. Can I just swap out the converted oil pump for a stock one to get back to dry sump? Or is there more to it?

  • Lackey-92

Posted June 22, 2004 - 03:27 PM



Yes, it's real easy. Just go back to the stock oil pump. The whole pump is not required. It's just the steel cover plate between the impeller that must be changed. The Dubach kit had an anodized red plate the stock plate is silver.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Diesel_99

Posted June 22, 2004 - 04:05 PM



  • Satch0922

Posted June 23, 2004 - 05:06 PM


Which kit did it have? White Bros made one too. Either way they should be similar. Try to get the instructions like Keith suggested.

Related Content


The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.