I Need Monster 426 HP, Like Rediculous...


39 replies to this topic
  • JYD

Posted June 21, 2004 - 02:37 PM

#1

im looking for a good 60 whp from my 02 426, suggestions? stories? please dont tell me to buy a 450, because the 4 speed is not an option.

thanks!

  • Satch0922

Posted June 21, 2004 - 02:40 PM

#2

why do you need 60 HP??

  • JYD

Posted June 21, 2004 - 02:46 PM

#3

why do you need 60 HP??


its a roadrace bike.

  • Satch0922

Posted June 21, 2004 - 02:56 PM

#4

A yz444 with 13.5:1CR piston will make close to 52HP. Check out Dirtrider.net and do a search on yz444.

  • logansowner

Posted June 21, 2004 - 04:54 PM

#5

Thats a lot of power from a 426, as far as I know that wouldn't even be possible without going to something like nitrous or a turbo, neither of which I believe has been made into a kit for a 426.

Didn't they only make something like 38 hp stock? You might be able to get 55 with a big bore kit and lighter, high comp pistons. But I don't think 60 horsepower is even possible on these bikes.

  • B86_Racer

Posted June 21, 2004 - 05:41 PM

#6

Tryce Welch got 60hp out of his YZ450... :thumbsup:

He might have even gotten 61hp out of it, I can't remember.

It is possible "with these motors"

  • Matt96xr6

Posted June 21, 2004 - 05:57 PM

#7

easily done!

port the head, 5 angle valve job, upgrade the cams, go bigger on the carb, bigger bore. Should not be hard.

  • Chazlom

Posted June 21, 2004 - 08:01 PM

#8

Hmmmmmm :thumbsup:

  • YZDAD1

Posted June 22, 2004 - 01:13 AM

#9

See my add in the "Bikes For Sale" section: YZF 426 with 459cc Engine. I'm sure it's exactly what you need! :thumbsup:

  • JYD

Posted June 22, 2004 - 04:34 AM

#10

See my add in the "Bikes For Sale" section: YZF 426 with 459cc Engine. I'm sure it's exactly what you need! :thumbsup:


well i dont need a whole bike really, want to trade motors...plus cash?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • YZDAD1

Posted June 22, 2004 - 06:43 AM

#11

I will if your engine is good, I would recommend exchanging engines with the carbs. Is yours totaly stock Yamaha?

  • Satch0922

Posted June 22, 2004 - 10:22 AM

#12

what HP does it make YZDad?

JYD...after you hot rod it, change the clutch, upgrade the chassis, fix 4th gear etc etc wouldn't your rather get a whole new bike??? Just a thought.

  • JYD

Posted June 22, 2004 - 10:41 AM

#13

what HP does it make YZDad?

JYD...after you hot rod it, change the clutch, upgrade the chassis, fix 4th gear etc etc wouldn't your rather get a whole new bike??? Just a thought.



whats wrong with my chassis and my clutch? i dont think there is anything wrong with my marchesini wheels, penske shock, and ohlins forks.

is the 5th gear ratio in a 426 the same as 4th gear in a 450?

  • Satch0922

Posted June 22, 2004 - 12:36 PM

#14

Typically engine builders will go through then entire engine when hopping them up. The bike "may" loose reliability as you push the limits. You should expect failure and plan ahead to avoid it.

  • Satch0922

Posted June 22, 2004 - 12:40 PM

#15

From another JYD Post:

"Quote:

Arm chair diagnosis:
Worst case,
Shift drum, 1 shift fork, 2 gears, 250$ +300 labor


well it does stay in gear at least, just jumps around. "





This is the stuff I am referring to.

  • tool

Posted June 22, 2004 - 02:03 PM

#16

how much would raising compression affect the reliabilty of a stock engine? :thumbsup:

  • FFRacing79

Posted June 22, 2004 - 03:43 PM

#17

Hmmmmmmm...reliability....HP.... :thumbsup:

  • JYD

Posted June 22, 2004 - 05:21 PM

#18

From another JYD Post:

"Quote:

Arm chair diagnosis:
Worst case,
Shift drum, 1 shift fork, 2 gears, 250$ +300 labor


well it does stay in gear at least, just jumps around. "





This is the stuff I am referring to.



i didnt post that, someone else threw that out there. like i said, whats wrong with my chassis? i just need more power, not a new bike.

  • YZDAD1

Posted June 23, 2004 - 01:17 AM

#19

Have not had it on the dyno (yet) I can do it though and really am going to, just need to make some time.I do know that my Son is usually first to turn one. It does not lack for power. And, is someone insinuating that there could be transmission issues with your exchange engine? The only way I'm taking in a trade will be that I recieve and install the exchange engine and check it out first. Then I'll immediately send out my engine (I guarantee mine to be excellent and I will dyno it too )

  • FFRacing79

Posted June 23, 2004 - 02:07 AM

#20

If you are not too far from Flint, I would be happy to put it on my pump. PM me for contact info.





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.