wr stator and flywheel in 02 yz426


No replies to this topic
  • jimn

Posted June 20, 2004 - 03:06 PM

#1

I recently installed a wr stator and flywheel in my 02 yz426(got it already ground wire modified from steahly).The bike was running good prior,now is running rich on top,black sooty plug etc.,went down one size on main jet,now its running lean and crappy.I also have a wolf cdi unit in it and was wondering if anyone out there knew if the yz's cdi was truly compatable with wr stator and flywheel so I can either put stock cdi back in,or? I just want to rule out the ignition if that may be the case or is it possible that the added weight would change jetting requirements.Help!!Thanks!





Related Content

Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.