Renthal bar question.

15 replies to this topic
  • YoungGunXR

Posted June 20, 2004 - 10:14 AM


My bro had a get off on his xr650r today and bent the bars pretty bad. Even cracked them. I was wondering if you can get renthal bars in cr high bend and have them fit in the stock triple clamps and use all the stock hardware? Thanks.

  • Roll_it_on

Posted June 20, 2004 - 01:06 PM


That what I had on mine until I went with Pro Taper bars. They worked fine with all of the stock cables and clamps.

  • YoungGunXR

Posted June 20, 2004 - 01:30 PM


So should they also work with his maier xc barkbusters? I forgot to mention that. Thanks.

  • malevolent73

Posted June 20, 2004 - 02:06 PM


Regular bars yes, I had them, in CR high...Fat Bars no!

  • Roll_it_on

Posted June 20, 2004 - 04:41 PM


The maier XC handguards will work too without a problem with the Renthal bars assuming you have the small diameter ends that came with the handguards. The bar ends on the aluminum bars are different then the steel stock bars.

  • YoungGunXR

Posted June 20, 2004 - 05:57 PM


Alrighty guys, Thanks! Im going to order the bars out of tomorrow. Thanks for the help. Now just switch everything out on the bars now....... :thumbsup: :devil:

  • YoungGunXR

Posted June 21, 2004 - 06:09 AM


Where did you buy your bars at. I looked in my rocky mountain atv mag. and couldnt find the bars I want. Where do I need to call to get some. Thanks.

  • Roll_it_on

Posted June 21, 2004 - 09:35 AM


I wish I could help but I got them through a local shop. I told them what I wanted and they ordered them for me so I am not sure where they got them from. :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • don87xr600

Posted June 21, 2004 - 02:55 PM


call Rocky mountain at 1-800-336-5437. They list the renthals you are looking for by bike model and year. I'm sure they will know which bikes ran the CR high bend and will be able to help you out.

  • don87xr600

Posted June 21, 2004 - 03:01 PM


rocky mountain part # R7221-01 in silver R7221-05 in titanium.

  • YoungGunXR

Posted June 21, 2004 - 04:58 PM


Thanks don! Now are those the cr high bend that will fit in the stock triple clamps? Also how much are those before I order them. I wont order till tomorrow.

  • Matt687

Posted June 21, 2004 - 07:24 PM


my friend gave me the stock bars that came on his 04 CRF450 and they fit no problem.The only thing is that they are a bit different shape that the origional XR bars, so it takes a mile or two to fully understand them. -Matt

  • don87xr600

Posted June 22, 2004 - 05:14 AM


yes those are the stock replacements $59.99

  • YoungGunXR

Posted June 22, 2004 - 06:21 AM


So are they the cr high bend? Thanks.

  • don87xr600

Posted June 22, 2004 - 11:24 AM


you talking to me? The stock numbers I provided are for CR high bend.

  • YoungGunXR

Posted June 22, 2004 - 12:25 PM


Yeah I looked them up and they just said they were for the cr500, cr250, cr125 89-91. But I guess thats what cr high bend bars are. :awww: Well I got some bars comeing to me from some place else that are cheaper than what rockymountain has for them. Thanks for the help. :thumbsup: :devil:

Related Content


FCR40 Tuning Woes- XR600R by aTuWitty

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  37 replies

What was your path to Beta? by officialhopsof

Dirt Bike   Make / Model Specific   Beta
  • Hot  79 replies

Post Apocalypse, ThumperTalk style! by Justin Pearson

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies

XR650L super moto wheels by greggkklee

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies

Would a Young Scott Summers still be Competitive today on an XR600R? What would he ride to be competitive today? by Jayzonk

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  141 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.