Pics - Thumper Racing +1.5" bar risers & Scotts Steering Stabilizer

4 replies to this topic
  • Brian_in_Long_Beach

Posted June 13, 2004 - 07:07 PM


Bike is a '99 WR with Applied Racing Triple clamp - bar mount holes are 10mm forward relative to the stock triple clamp. Scotts is mounted with the Scotts Universal Mount. ProTaper Enduro Hi bars (might try Tag CR double Hi in the future). I'm 6'4" and this set-up allows me to stand comfortably all day long.







  • Dingo151

Posted June 14, 2004 - 03:57 AM


I just bought the same setup only with the 7/8 bars. I'm not as tall as you(6'1") but I still feel like I'm being pulled over the front of the machine. Whats your advice on bar choice I was afraid that a super tall bar wouls be to high with the risers?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Brian_in_Long_Beach

Posted June 14, 2004 - 08:41 PM


I had the Enduro Hi's on my XR600 and transferred them over. I wouldn't mind another 1/2" of bar height, a little narrower would be nice too. I've been running the Enduro Hi's since I got the bike brand new in '99 so it must work:)


  • oldbones

Posted June 15, 2004 - 01:30 AM


Are those bar risers part of the triple clamp package, or did you get them seperate?

  • Brian_in_Long_Beach

Posted June 15, 2004 - 09:34 PM


Triple clamp is from Applied Racing
Bar mounts are from Thumper Racing (Baja Designs carries them)
Steering stabilizer and 'universal mount' are from Scotts



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.