PW50 Plastics


9 replies to this topic
  • woodsk

Posted June 08, 2004 - 03:50 AM

#1

I am getting ready to get my daughter a CRF50, and hand down her PW 50 to my youngest son. I wanted to replace the plastics because they took a good beating while my daughter was leaning.

So far I have checked maier, acerbis, and ufo with no luck. Anyone have any ideas?

Thanks

  • 125shifter

Posted June 08, 2004 - 04:13 AM

#2

Dealer?

  • Eddie Sisneros

Posted June 08, 2004 - 04:18 AM

#3

yamaha only.the stuff is pretty cheap.

  • woodsk

Posted June 08, 2004 - 04:43 AM

#4

Thanks guys, I'm going to a shop today anyway I guess I will just order it there.

  • MX600

Posted June 08, 2004 - 05:04 AM

#5

Try Ronnie's for original stuff. Should be cheaper than your dealer.

  • Rieger462

Posted January 18, 2010 - 10:15 AM

#6

PWOnly.com

  • Fast Forward

Posted January 18, 2010 - 11:38 AM

#7

Just a thought, maybe run the old plastic for the first few rides because the new plastic could be in for some abuse. To make the old plastic look a little better a common Yamaha trick is to heat the blue plastic with a torch or heat gun (careful, too much heat and you know what happens to plastic) and it will remove most of the white scaring on the plastic.

  • driedupmotocrosser

Posted January 18, 2010 - 06:41 PM

#8

ebay... have kits for super cheap check it out

  • mstyer

Posted January 19, 2010 - 05:14 AM

#9

5 1/2 year old thread.

  • kx96

Posted January 19, 2010 - 05:20 AM

#10

wow how did any 1 pick up a 6 year old thread




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.