Jump to content

TTR 90 AFTERMARKET GRAPHICS - PLASTIC ?

By dp400,
in YZ400F/426F/450F/450FX

 Share

Recommended Posts

Apprentice

BAL

Posted
Posted

My son has a 02 TTR90 and I just went through replacing the graphics and plastic. For plastics you are forced to buy from your yamaha dealer, no after market company makes it. For graphics/seat cover there is N-Style, you are forced to buy both, or Fast50s. Front/rear plastics ran me $78.00 OTD and the N-Style grphic kit cost $118.00 OTD. BTW the backgounds for the plastics are not included and run close to the same price as the plastics.

For performance parts check out http://www.precision-racing-components.com/NewFiles/YamTTRProd.html

Link to comment
Share on other sites
Community Regular

rvanliere

Posted
Posted

I just purchased the N-Style Graphics for my Sons 2001 TTR90 , They are very nice . The Tank Graphics are very durable . 10 times the durability of the stock graphics . I also like the gripper seat cover that comes with it . Very easy to install if you have a staple gun .I also added a FMF powercore pipe/silencer to it. It really sounds like a thumper now . a big difference in the flow of exhaust also . ( bigger outlet ) . I will post a picture if you want to see what they look like in real life . ?

Link to comment
Share on other sites
Veteran

dp400

Posted
  • Author
Posted

rvanliere, I would love to see what the graphics look like! I just bought a very used 2000 ttr90. It came with the FMF pipe which is very nice. The plastic is whipped out and there are no more graphics on the bike. I need to buy some new parts to freshin the bike up for the first ride - any suggestions on where to buy parts for a good price? Thanks Dan

Link to comment
Share on other sites
Community Regular

rvanliere

Posted
Posted

I will get it cleaned up and take a snap of it for Ya . I dont know on the plastics though ( I'm guessing the dealer . It took a long time to come out with graphics for this bike . My kid ran through the biggest mud hole at the track on Sunday so I will get it cleaned and post the pic. Back in about 15 minutes

Link to comment
Share on other sites
Veteran

dp400

Posted
  • Author
Posted

rvanliere, YOU ARE THE BOMB!! ? I just sat down with my two kids and showed them the picture that you sent us from accross the contry! TOO COOL ! BTW the bike looks great! :D Its hard to believe our bike can look that good - the kid that we bought it from must have dragged his bike everywhere - the plastic is trashed, sides,tops and bottoms. Anything I should know about these 90s? Valve adj. or anything else? Thanks Dan

Link to comment
Share on other sites
Community Regular

rvanliere

Posted
Posted

Hey I'm glad Ya enjoyed the picture . the only thing I can think of is change the oil , clean and oil the filter and enjoy the heck out of it . These bikes are bulletproof . I doubt you would have to ever do anyting to the bike while your kids are young enough to ride it . I have never had to kick it over 2 times since I bought it. Its the best investment I have ever made . Something I can do with My son ( Just us two ) . I have a daughter that might try to ride it sometime soon . Also have a son that is 1 1/2 and will grow into it . I doubt I will ever have any repairs to do other than flat tires .This bike was stolen from my garage last fall . I was about to go insane . Turned out being a runaway 15 year old who took it . I called the cops , they knew who took it becouse he was seen riding it but got away. I went down to the local hangout for teens and asked the right questions . Finally I found out who was helping the kid hide out and threatened him with the cops and ended up getting a phone call from the kid who took it . After verifying that the bike was where he hid it . I called the cops with the caller ID number on my phone and he was arrested within 10 minutes . I came to find out that the kid had weapons and drugs on him . Hope he gets some help . Anyways what I was leading up to is , the kid had ran this bike threw cornfields and down railroad tracks and deep weeds . the sprockets and chain was wrapped up with weeds and cornstocks . I couldnt even push the bike . I was mortified . spent about two hours cleaning it up and went to start it ( boom ) first kick . Runs perfect to this day . I am so lucky I didnt wait for the cops to investigate , ( I would still be looking for it ) . I have a feeling the plastic isnt that expensive . The rear fender and side number plates are one whole piece and the front fender isnt that big . Good luck with everything and my advise is get a fmf pipe . Its sounds soooo cool . Really dresses things up too !! ?:D

Link to comment
Share on other sites
Community Regular

rvanliere

Posted
Posted

Here is the prices for your plastics .

Front Fender http://www.powersportspro.com/partsfish/Displayfiche.asp?Section=110937&ID=4992

Sidecovers : http://www.powersportspro.com/partsfish/Displayfiche.asp?Section=110938&ID=4992

or everything else for your bike ( you can look up the parts and numbers that the dealer has at

www.partsfish.com

[ June 18, 2002: Message edited by: rvanliere ]

[ June 18, 2002: Message edited by: rvanliere ]

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

ThumperTalk

Register a new account Sign In Now
 Share
Go to topic listing
×
×
  • Create New...
Terms of Use
Copyright
Privacy Policy