Best way to clean clutch steels


4 replies to this topic
  • pmh971

Posted May 28, 2004 - 07:42 AM

#1

Hey Guys, I was wondering if anyone had any goods ways to clean up the steel plates in the clutch. I ordered new friction plates (steels were out of stock) and needed to clean up the steels. Thanks

  • skthom2320

Posted May 28, 2004 - 09:05 AM

#2

I would replace them all together.

Order them from North County Yamaha or Yamaha of Troy.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Hamish

Posted May 28, 2004 - 11:37 AM

#3

check the warp on the steel plates using a sheet of glass and a set of feeler guages. If they are in spec find someone who has a bead blaster and give them a hit with that. The bead blast will give them a nice 'as new' grippy finish.

  • dooweb2

Posted May 28, 2004 - 04:50 PM

#4

bead blast if you must.(Id replace them as a set. do not sand blast that heats up the plates and distorts them

  • gonzo

Posted May 28, 2004 - 05:11 PM

#5

I would replace them all together.

Order them from North County Yamaha or Yamaha of Troy.


Agreed. They are only 25 bucks to replace them all. Call BSY at 888-BSY-FAST





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.