clutch springs

1 reply to this topic
  • slowrider

Posted May 24, 2004 - 03:38 AM


I bought a 2002 yz426 and the clutch pull is really really tight, I took off the clutch and see that the previous owner installed aftermarket springs.. I want to get my clutch back to easy pull what springs should I get? thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • skthom2320

Posted May 24, 2004 - 08:40 AM


The 426 never had an easy pull.

Do a search using "all posts" on the term "clutch pull" and you'll find a couple of tricks to lighten up the pull.

Things I remember seeing -

1. a different lever, I think from an old TT500
2. MSR raptor perch/lever
3. cltuch arm from an older 400/426, maybe a 1999?
4. lengthening the clutch arm 5-7 mm

Related Content


yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.