Rear Excel rim on XR600


3 replies to this topic
  • JeffreyT

Posted May 22, 2004 - 06:04 PM

#1

Okay, I have a 94' XR600r and a new Excel rim to replace the stock bent-up one on the bike and was wondering if the stock spokes will work with the new rim? I read on some site that they will not. Any ideas before I make the attempt?

  • EastCoastWheels

Posted May 24, 2004 - 03:40 PM

#2

Jeff, They "should" work however, the bike is a 94 and you are replacing the rim... do yourself a favor and replace the spokes... they are too old...

Jeff

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • kismetsdad

Posted June 03, 2004 - 03:51 PM

#3

I replaced a honda XR 600 wheel with excel rim and brand new honda spokes. I tightened them daily and still broke 20 honda spokes. I replaced the honda spokes with thicker stronger spokes from XR's only. I haven't had a broken spoke since.

  • JetPilot

Posted June 04, 2004 - 06:43 AM

#4

Thanks for the spoke info. Im about to replace buy a couple Excel Rims and was wondering about the spokes. I will get the thicker ones :thumbsup:





Related Content

Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 8 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.