screwed! keyway broke the crank

1 reply to this topic
  • tool

Posted May 20, 2004 - 08:04 PM


00 yz426 :awww:
well, i thought i blew a gear so i split the case and found the trans fine. but the CB gear had alot of play in it, the walls that hold the key in place are broken off - even with a new key theres too much play.
also, a torx screw came off the CB wieght, there was only 2 screws. maybe i lost the screw and it was crunched up, but the metal on the drain plug didnt look like screw. and theres nothing else broken. the CB gear is even fine.
what should i do? 01 crank seems the way to go... where would i find a crank puller tool?
the rings lasted longer than the crank :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sirthumpalot

Posted May 21, 2004 - 03:06 AM


Find that missing screw before you put it back together! Compare prices, the 01' crank and gear is the way to go for longevity, but is the cost in your budget?

Related Content


Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.