What are Stock 04 YZ450F Jetting Specs?


6 replies to this topic
  • Joe_Jet

Posted April 22, 2004 - 04:37 PM

#1

Pilot? Needle Clip Position? Main Jet?

Thanks,

Joe

  • falshh

Posted April 22, 2004 - 04:53 PM

#2

it tell what they are in the Yamaha manual you got with the bike, If someone doesnt tell you soon when I get home Ill look it up and then tell you.

  • revolucien

Posted April 22, 2004 - 05:23 PM

#3

Pilot #42, Main Jet #165, clip 4th position or center

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Joe_Jet

Posted April 23, 2004 - 10:47 AM

#4

Thanks for the replies. I read the manual, but sometimes the jetting doesn't actually match the manual. I received a 170 main in a bag with the bike?

Thanks,

Joe :)

  • TonyDeCoster

Posted April 23, 2004 - 10:57 AM

#5

Stock jetting will always match the service manual. The 170 is optional depending on your conditions...

  • Joe_Jet

Posted April 27, 2004 - 05:11 PM

#6

My 04 CRF 250 R Jetting was not as spec'd in the manual. Don't believe everything you read!

Joe :)

  • Vet28

Posted May 19, 2004 - 06:16 AM

#7

FORGET WHAT'S IN YOUR MANUAL. CHECK THE CARB ON YOUR BIKE. MY 2003 450F HAS A 165 MAIN (WHICH I CHANGED TO 168 WHEN I PUT MY PIPE ON). MY 2004 450F SAYS 165 IN THE MANUAL, BUT IT HAS A 172 MAIN. THEY DON'T CHANGE THOSE BOOKS THAT OFTEN.

VET28





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.