Lame oil questions.....

3 replies to this topic
  • hvyw8t

Posted April 20, 2004 - 12:16 PM


Help me settle a little dispute. How much oil do you guys put into your bike after an oilchange, without dropping the oil filter?? How often do you clean the screen in the oil line?? Sorry for the lamo ?s. Thanks Big Mark

  • Joe_Jet

Posted April 20, 2004 - 01:01 PM


I change the filter every time. I start off with 1000cc and do the pressure check per the manual, shutdown, check qty and add if needed. I only check the screen after break-in and then maybe every 6th oil change.

Joe :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sirthumpalot

Posted April 20, 2004 - 01:12 PM


It's been dusty so I've been changing every other ride. Drain, add 1.5L, check the filter every couple of changes. I haven't checked the screen in the front tube in a while.

  • aford541

Posted April 21, 2004 - 07:53 PM


On the 450 I put in 1200 and let her ride with a filter change

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.