Noise Test - PC496 on WR450F


No replies to this topic
  • SBK

Posted April 11, 2004 - 12:18 PM

#1

Did a little sound pressure level testing today with the PC496 I picked up from a fellow TT'er a while back. Finally got the bike back together after some winter wrenching and some suspension work.

These tests were run with a calibrated B&K sound pressure meter set to A-weighting, slow response, random incidence.

Bike is a 2003 WR450, JD Jetting (for open stock pipe) and a recently re-packed PC496 slipon with spark arrestor screen. Bill provided three inserts for the PC496 pipe, they have a lead-in pipe of 1", 1-1/8", and 1-1/4" respectively. Here's the data:

1-1/4" Insert
99.6 dB @ 5250
95.0 dB @ 4000

1-1/8" Insert
98.6 dB @ 5250
94.3 dB @ 4000

1" Insert
97.3 dB @ 5250
94.3 dB @ 4000

Interesting (to me anyway) that the two smaller inserts tested the same at 4000rpm, but the differenc really showed at higher RPM. Sounds like lots of different places test at different RPM's so I checked a couple different points just for giggles.

Hope somebody finds the info useful.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.