wr volt regulator probs


No replies to this topic
  • xzlram

Posted April 08, 2004 - 03:25 PM

#1

Howdy, I have an 02 yz426 that I have put a wr lighting coil on I also have a wr regulator. when I start the bike the voltage jumps to around 35 volts then drops down to 13-14 range. I have the blue wire on the regulator hooked up to the yellow wire on the lighting coil and the black wire grounded. Is there something I am missing or should I just buy the moose regulator? Thanks DJ




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.