hooking up fuel lines on a ty-davis tank


No replies to this topic
  • TallBoysWRF

Posted April 05, 2004 - 06:51 AM

#1

I have a ty-davis style YZ tank on my WR and I have to hook up the three petcocks (1 is stock, 2 came on the tank). I used "t"'s to connect the lines togeather no problem, BUT how can I hook the line up to the carb without making a big loop up and around to the carb? The bottom edge of the tank is a hair above the bottom of the float boal and I'm afraid if I crash or get air in the line somehow after riding for a while, I won't be able to get the bike started again. The pressure from the fuel forces the air out of the line when the tank has fuel above the carb, but I'm afraid that the fuel in the bottom of my tank will be useless when I need it. Any ideas?





Related Content

Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 3 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.