Pic: My Blue Wire Mod Solution

No replies to this topic
  • teamtoxic

Posted April 25, 2002 - 12:35 PM


Here's a pic of my blue wire mod...
Posted Image

I just couldn't bring my self to leaving that thing unplugged all the time, so I just added this switch. It was simple, cheap, and leaves me worry free. I can start my bike easily by "disconnecting" the wire with the switch, then flip it back on for some riding, without wondering what its doing to my timing.

- $3 toggle switch (RadioShack)
- about 1 1/2 foot of wire
- solder/solder gun
- my mounting bracket is actually from an Erector set :)
- 20 minutes

I can see it now...
"Dude, what's that switch for?"
"It's for my nitrous oxide man!"

Hope ya like it :D

Forgot to mention, I'll only use this when cold starting. I have absolutely <u>zero</u> problems starting it after it has warmed up.

[ April 25, 2002: Message edited by: teamtoxic ]

Related Content


The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.