Feedback on moriwaki


10 replies to this topic
  • highmark1

Posted March 30, 2004 - 05:06 AM

#1

Anyone have any feedback on moriwaki system? I'm getting ready to spend the money but want to know that it is for a good product. Eye candy is important but performance is more important. Down low to mid is most important. Already uncorked with stock baffle moded to be longer like hrc, 13t sproket and thinkin on gettin edlebrach carb.

  • motart

Posted March 30, 2004 - 05:12 AM

#2

go buy it right now! but really, in all honesty, this was the best fit and finish product i put on my bike. the welds are works of art. mine's setup as a motard with a tm40 carb and holes in the airbox. the pipe is actually quieter than the stock exhaust with the drilled out tip. it gave the bike more power everywhere. just make sure you jet to suit as just putting the pipe on will lean the bike some. money well spent in my opinion. good luck!-jeff :)

  • irondude

Posted March 30, 2004 - 09:34 AM

#3

Just curious about the loudness of the Mori.
Qadson reported that Mori rep's put the pipe at well over 100 decibels...to loud for us Cali dual sporters.

Is that what you have experienced?

:)

  • qadsan

Posted March 30, 2004 - 02:22 PM

#4

Here's the scoop straight from Moriwaki, which lists the XR650R exhaust at 102db. I talked to someone who had their system tested and was told it tested at 101db. I never did find out if that was with or without the spark arrestor installed.

http://www.moriwaki....004-english.htm

  • big t

Posted March 30, 2004 - 04:01 PM

#5

If your thinking about the Edelbrock go ahead and get it. You won't regret it. I like the Moriwaki pipe also but I keep hearing how good the stock pipe is. I'm sure the Moriwaki would be lighter but I'm not concerned with weight. If it helped power everywhere then it would be worth it. I'm a little concerened about the how loud it is also. Let us know if you get one.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Rokatt88

Posted March 30, 2004 - 04:25 PM

#6

Just bolted up my Edelbrock last night! :) Trick carb. Thing shiny..bright & shiney make motor go vroom vroom! Me like! :D

  • jws

Posted March 30, 2004 - 05:34 PM

#7

Just bolted up my Edelbrock last night! :D Trick carb. Thing shiny..bright & shiney make motor go vroom vroom! Me like! :)


just did mine tonight :D :D :D :usa:

  • highmark1

Posted March 30, 2004 - 06:06 PM

#8

where is the best place to get an edlebrock and how much?

  • qadsan

Posted March 30, 2004 - 07:05 PM

#9

where is the best place to get an edlebrock and how much?



Contact Rob or Denise Barnum of Barnums Pro Products. Rob did R&D for Edelbrock on this carb and other products for Edelbrock and he sells them at a good discount from retail. Rob is also a ThumperTalk partner, professional XR650R racer, pro engine builder, pro suspension tuner, sells aftermarket parts, etc. You can email him at sales@barnumspro.com or call him at (760) 868-8097. He's a great guy to deal with concerning bikes, engines, mods, suspension, exhaust, providing pit support, racing Baja, etc.

  • motart

Posted March 31, 2004 - 03:25 AM

#10

if this helps in comparison-my friend's drz400 w/ a full yosh system is by far louder than my xr. putting the spark arrestor back in the moriwaki does quiet it down a hair, but chokes it up a little as well.

  • Rokatt88

Posted March 31, 2004 - 05:41 AM

#11

where is the best place to get an edlebrock and how much?



Contact Rob or Denise Barnum of Barnums Pro Products. Rob did R&D for Edelbrock on this carb and other products for Edelbrock and he sells them at a good discount from retail. Rob is also a ThumperTalk partner, professional XR650R racer, pro engine builder, pro suspension tuner, sells aftermarket parts, etc. You can email him at sales@barnumspro.com or call him at (760) 868-8097. He's a great guy to deal with concerning bikes, engines, mods, suspension, exhaust, providing pit support, racing Baja, etc.



Barnum's For Your Bikes That Race,

It's Such a Happy Place!

Hap - Hap - Hap - Hap - Happy Place,

It's The Place For Bikes That Race!

:usa: :D :D :D :D :usa:

:)





Related Content

Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 8 replies
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.