Carb Drain Hose Routing Tip

No replies to this topic
  • cowboyona426

Posted April 12, 2002 - 06:34 PM


For those of us who are always pulling off our carb doing things like the BK Mod or re-jetting the puppy or cleaning it or whatever, re-routing the five drain hoses back in front of the swingarm where they are supposed to be can be quite a task (at least it was for me the first time I tried). But I came up with a simple yet effective way to easily route the drain hoses back where they need to be. Simply push the long end of an allen wrench small enought to fit inside the drain hose snugly without falling out and use it as a guide. It makes re-routing the hoses a whole lot easier. Hope this helps some of you.

Related Content


Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.