Triple clamp handguard mount

1 reply to this topic
  • crazyadam

Posted April 10, 2002 - 04:09 AM


Who would be interested in Aluminum triple clamp handguard mounts?
I can machine and annodize them, hopfully for around 40$, (less minus annodizing) if I make enough of them.

Does anyone else have a top clamp that clamps from the front, instead of the side like the stock clamp?

I have a TOPAR clamp... bolts in the front
the stock.. and TAG, Applied all seem to bolt from the side.

I can make somthing similar to the fastway, or the GYT-R part,
Or the cheaper method would be a piece of Stainless bar stock that would be formed (bent) to fit, at any angle we choose.

: what angle away from the bars should I start with? Maybe about 10 deg.s
: How far up off of the triple clamp should we go?

Let me know of any common problems?
It should be pretty simple.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Guest_Guest_*

Posted April 10, 2002 - 10:24 AM


I machined out a set for my yz400 with front mounting holes. I made them straight up and 4.5 inches long end to end not hole to hole. They are also machined to fit tight around the triple clamp so the bolts do not take al the stress in a crash. The only problem was the brake line had to be shifted either up or down. But the location of the clap was right on. I would sugest if anything making the mount stick out a little further forward. I used 5\8" x 1" material.

I also made new mounts for the outer part of the guard and had them welded to the end of the guard.

Now the mounts don't give but the guards are tweeked preety good.

I just polished mine with a buffing wheel. They look good and The material was only about 4 bucks.


Related Content


Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Help with 2000 yz426 by weekend woods racer

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.