Jump to content

  • Follow us:

  • Facebook
  • YouTube
  • Twitter
  • Google+
  • Instagram
  • RSS Feed
  • Google+





Photo
- - - - -

2016 WR450F 14 Tooth CounterShaft Sprocket


  • Please sign in to reply

9 replies to this topic
  • Ka0sX

    TT Bronze Member

179 posts
Location: Australia

Posted October 14, 2016 - 03:34 PM


Hey guys just wondering if a 14tooth will fit with the stock case save that is installed on the bike? Dont want to have to grind down the case saver

 

Thanks



  • Macsplace

    TT Member

71 posts
Location: Virginia

Posted October 14, 2016 - 06:04 PM


Unfortunately a 14 tooth will not fit with the OEM case saver without some grinding. I am using the OEM inner metal case saver but had to slightly enlarge the bottom bolt hole and elongate the top bolt hole so it would fit with a 14T sprocket.  In the photo I left out the top bolt so you could see how much material to remove if you want to use the OEM part.WR Case.JPG



  • Ka0sX

    TT Bronze Member

179 posts
Location: Australia

Posted October 14, 2016 - 06:31 PM


Unfortunately a 14 tooth will not fit with the OEM case saver without some grinding. I am using the OEM inner metal case saver but had to slightly enlarge the bottom bolt hole and elongate the top bolt hole so it would fit with a 14T sprocket.  In the photo I left out the top bolt so you could see how much material to remove if you want to use the OEM part.attachicon.gifWR Case.JPG

 

 

I wonder if an after market case saver one would work ?



  • Macsplace

    TT Member

71 posts
Location: Virginia

Posted October 14, 2016 - 06:47 PM


I wonder if an after market case saver one would work ?

Possibly, you may want to email whatever company you choose and ask them if their case saver would fit with a 14T sprocket. Maybe someone else will respond with some additional info.



  • Krannie McKranface
36,188 posts
Location: California
Garage View Garage

Posted October 14, 2016 - 07:13 PM


You just buy the one made for 14t.

It is usually listed.



  • knuckleduster271

    TT Bronze Member

222 posts
Location: Ohio

Posted October 16, 2016 - 06:26 AM


I run a tm design plastic case saver- fits a 14 t no problem

  • foggy3061

    TT Bronze Member

172 posts
Location: United Kingdom

Posted October 17, 2016 - 11:22 AM


Hey guys just wondering if a 14tooth will fit with the stock case save that is installed on the bike? Dont want to have to grind down the case saver

 

Thanks

 

Or you could make your own case saver for the 14t.......

 

I made one as there were very limited options when i bought the bike.

 

20160523_180700_zpsgkfgckq1.jpg



  • Ka0sX

    TT Bronze Member

179 posts
Location: Australia

Posted October 28, 2016 - 12:49 AM


hey guys just an update, Tearing bike down for some work greasing etc, Need to change tires tubes etc,

 

So wondering since i cannot fit a 14T front what would be the equivalent to a 14F 50R ??

 

Think the opposite  12F 52R ??

 

Thanks



  • YZEtc

    TT Addict

3,580 posts
Location: Connecticut

Posted October 28, 2016 - 01:52 AM


13/46

 

or

 

12/43

 

12/52 is much lower gearing than 14/50.



  • craig652

    TT Member

40 posts
Location: Ohio

Posted October 28, 2016 - 09:23 AM


If you like the original gearing then I'd go 13/47....

 

this website is helpful     gearingcommander.com

 

 

 

hey guys just an update, Tearing bike down for some work greasing etc, Need to change tires tubes etc,

 

So wondering since i cannot fit a 14T front what would be the equivalent to a 14F 50R ??

 

Think the opposite  12F 52R ??

 

Thanks






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.