WR400 oil leak now not starting



No replies to this topic
  • pitbikewreck

Posted October 10, 2016 - 08:14 PM

#1

Ok so I bought a 1998 wr400 and the guy said it didn't run and he didn't want to deal with it. I took it home and did some work on the carb ( edelbrock) and then went to kick it ( I put fresh fluids in her). When I kicked it it sounded like it wanted to start then started within 5 hard kicks. Then I start to notice oil spewing out and one of the oil line bolts broke off and he didn't tell me about it. So I got a new oil bolt and new oil and tried to start it but now it's not starting at all and has starts coming out after about 8 kicks. Just wondering if there's anything I can do before tearing into the carburetor.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.