Basic Stock Rear Light Question

3 replies to this topic
  • Snow Drift

Posted September 22, 2016 - 02:10 PM


This is a bit of simple silly question but I just want to check something. I am returning to the stock style rear light on my 2007 WR450 and have bought an original rear fender and the two thin foam triangle bits of pad that go above and below the rear light.


Both foam triangles have one adhesive side and I just wanted to know how it is supposed to be. Are you supposed to stick the adhesive side to the rear fender and the bottom one to the plastic bowl that holds the light in?



  • Pinepig

Posted September 22, 2016 - 03:45 PM


They are both on the actual tail light on mine ( OEM )

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Snow Drift

Posted September 23, 2016 - 03:47 PM


Thanks for the reply. Am I correct in thinking that one goes on the top and one on the bottom of the light? I am surprised that they are stuck to the actual light as I would have thought that might cause an issue. Can I ask what year your bike is?

  • Pinepig

Posted September 23, 2016 - 08:34 PM







Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.