2011 yz450f locked up


9 replies to this topic
  • mattmx42

Posted September 10, 2016 - 03:14 PM

#1

So I bought my bike and took it straight to the track. I just checked IMG_1473549208.418878.jpg IMG_1473549208.418878.jpg the oil lubed the chain and air filter, and headed out bike was fine all day well atleast till the end when I thought it sounded a little funny. So I loaded it up and went home got to the house unloaded it to take a test ride to see if I could figure out what was wrong with it fired it up let it idle for a minute went to take off and boom stopped running.... Went to kick it and kicker wouldn't move so I put it in gear rolled it backs freed and up and pushed it into my garage let it cool down and it fired right back up fine but the coolant was low which my dumb self didn't check what should I do should I rebuild it will it be fine I'm kinda lost on what to do plz help!!!!

  • Krannie McKranface

Posted September 10, 2016 - 03:22 PM

#2

How low is low?

 

What does the oil look like?

 

What does the oil filter look like?

 

Did you change the oil and oil filter before riding it?



  • mattmx42

Posted September 10, 2016 - 03:36 PM

#3

Like ten to twelve oz of anti freeze was in it and I haven't drained the oil doing that in the morning and unfortunately the itch to ride took over the common sense to change the oil.

Edited by mattmx42, September 10, 2016 - 03:37 PM.


  • coastlinecascott

Posted September 11, 2016 - 04:05 AM

#4

Check the cam chain. Might be worn or too stiff

  • jmd426

Posted September 12, 2016 - 10:59 AM

#5

Id be looking at the cam chain and dissecting the oil filter



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mattmx42

Posted September 14, 2016 - 09:32 AM

#6

IMG_1473874345.573336.jpg

  • mattmx42

Posted September 14, 2016 - 09:34 AM

#7

IMG_1473874450.776292.jpg that ground after I sprayed the filter out

  • mattmx42

Posted September 15, 2016 - 02:59 PM

#8

What's the options?

  • coastlinecascott

Posted September 15, 2016 - 03:12 PM

#9

Did you pull the valve cover and check the timing?

  • grayracer513

Posted September 15, 2016 - 03:41 PM

#10

The debris in the oil filter looks entirely normal, frankly.  Although I must say neither of the pictures is particularly useful.







Related Content

Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.