2008 WR450F Rear Fender Swap


3 replies to this topic
  • Richard Hughes

Posted September 06, 2016 - 11:32 AM

#1

I have seen many pictures around here where guys are using a 2006-09 YZ450F rear fender on the 2007-2011 WR450F.

 

Question is how are handling the cdi unit and wire harness that the stock 2007-2011 rear fender houses? Install pictures? The stock fender has like a housing made on it for the cdi unit etc.

 

I already have YZ450F shrouds and want to change the bikes color to yellow or white and the rear fender is my only hang up.

 

Thanks, 



  • stevethe

Posted September 06, 2016 - 02:22 PM

#2

Acerbis makes or made a white rear fender for the WR. Not sure about yellow. Same look as a YZ.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • craig652

Posted September 07, 2016 - 04:19 PM

#3

I had an 08 that I moved the CDI into the airbox. Without the restrictive snorkel, there was plenty of room.

 

I have seen many pictures around here where guys are using a 2006-09 YZ450F rear fender on the 2007-2011 WR450F.

 

Question is how are handling the cdi unit and wire harness that the stock 2007-2011 rear fender houses? Install pictures? The stock fender has like a housing made on it for the cdi unit etc.

 

I already have YZ450F shrouds and want to change the bikes color to yellow or white and the rear fender is my only hang up.

 

Thanks, 



  • Richard Hughes

Posted September 08, 2016 - 09:55 AM

#4

Thanks Guys






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.