fork rebound screw problem



No replies to this topic
  • leif

Posted March 31, 2002 - 08:09 AM

#1

I have a possible problem with my rebound screws. The last 4-5 clicks screwing in are really hard. Is that normal? With the caps off, the screw turns freely. But after I install them, it gets hard towards the end. I dont remember them being this way. The amount of threads above the nut is at 20MM.

[ March 31, 2002: Message edited by: leif ]





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

1998 yz400f will not idle. by trolley


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  32 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.