Need 02-04 linkage measurements

No replies to this topic
  • R_Little

Posted March 15, 2004 - 05:16 AM


I have a 450 shock I's like to use on my 2000 WR.
It's 5mm longer and I believe the linkage is changed to compensate. I'd like to try the later model likage with the new shock. It needs to fit the older swingarm and frame.

Dimensions I need are:

Dia of the bolt that mounts the dogbone to the swingarm.

Width of the dogbone that fits into the swingarm including the bushings in the bearing.

Width of the pull rod where it attaches to the frame.

Dia of that bolt as well.



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.