Lubrication System

3 replies to this topic
  • Mr426f

Posted June 22, 2016 - 05:15 AM


How does a yz426f lubrication system works? Do anyone have a diagram?

  • grayracer513

Posted June 22, 2016 - 06:51 AM


All YZF models up to the '14 YZ450F, and the 450 models based off the same engine (WR, FX) are dry sump oiling systems.




Basically, oil is kept in a separated tank or reservoir and pumped to where it's needed, then returned to the tank as it gathers in the bottom end.  Oil is delivered first to the filter, where it splits in the cover into one passage that feeds the crank through the right end of the shaft, and another that leads to the external oil manifold that feeds the transmission and the cams.


Anything specific you wanted to know? 

Attached Thumbnails

  • Untitled 3.png
  • Untitled.png

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Mr426f

Posted June 22, 2016 - 08:22 AM


How exactly does the piston gets lubrication lol

  • grayracer513

Posted June 22, 2016 - 02:20 PM


Oil thrown off at the rod bearing.  Most 4-strokes of any size do that.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.