98 xr600 stiff trottle

2 replies to this topic
  • petem

Posted March 13, 2004 - 07:10 PM


I have a 99 yz400f and swapped bikes with my xr riding bud
i noticed he has a very stiff trottle.Giving you arm pump
after a couple of twists.He said he has always had this problem before and after carb and exhaust mods.Has push pull
tupe trottle.He's had it all apart with no signs of defects,slide,cables and trottle.Seems worse with engine running with vacuum pulling against slide.Any suggestions Thanks,Pete

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • irondude

Posted March 13, 2004 - 07:35 PM


needs grease on the bars under the throttle
needs throttle back out 1/4inch or so from end of bars
needs new cables
needs varnish removed from slide
cables kinked under the tank

  • petem

Posted March 14, 2004 - 05:30 AM


Thanks for the reply, I will inspect and check all those items.If it had a snappy trottle the bike would rip,Thanks

Related Content


Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies

1993 XR600R rebuild by ove

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  40 replies

What was your path to Beta? by officialhopsof

Dirt Bike   Make / Model Specific   Beta
  • Hot  79 replies

93 xr650l Restoration Project by Zigster

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies

Fell Off Trailer by usafxr

Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.