Reusing base gasket (haven't removed bore)


3 replies to this topic
  • Aaron_Baker

Posted May 09, 2016 - 01:19 PM

#1

I'm putting a set of valve in my bike only rebuild it at the start of the year so pulled off the head not going to touch the bore do you think the base gasket will be ok



  • grayracer513

Posted May 09, 2016 - 01:27 PM

#2

If you did not unbolt the cylinder, you can reuse the gasket.



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Aaron_Baker

Posted May 09, 2016 - 01:41 PM

#3

Good good knew it would be but thought no harm in double checking cheers mate

  • drtrcr400

Posted May 09, 2016 - 05:22 PM

#4

If you removed the head then the base gasket has been compromised and should be replaced.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.