Fuel Tank Hardware


2 replies to this topic
  • yamhammer

Posted April 25, 2016 - 11:28 PM

#1

Hi
So I just splurged a bit and got the Acerbis 6.6 gallon behemoth of a tank for my 2003 WR450F and while not a problem per se, they expect the original mounting hardware to be re-used, while I was hoping to be able to quick change if I saw fit.

I checked ebay and failed to find any such thing. Hoping perhaps somebody here has a set to part with or knows where I can get it.

Specifically I seek the attach point for the seat, the peg for the rubber strap, and the 2 brackets/knobs that engage the rubber mounts on the frame rail.

Thanks!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tomerb

Posted April 27, 2016 - 06:01 PM

#2

Hi
So I just splurged a bit and got the Acerbis 6.6 gallon behemoth of a tank for my 2003 WR450F and while not a problem per se, they expect the original mounting hardware to be re-used, while I was hoping to be able to quick change if I saw fit.

I checked ebay and failed to find any such thing. Hoping perhaps somebody here has a set to part with or knows where I can get it.

Specifically I seek the attach point for the seat, the peg for the rubber strap, and the 2 brackets/knobs that engage the rubber mounts on the frame rail.

Thanks!

 

 

All the parts you need are a your local Yamaha dealer.............



  • yamhammer

Posted April 27, 2016 - 06:24 PM

#3

Ah yes
Not used to having a vehicle that still has parts available from the dealer.... long since discontinued is the typical story




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.