2003 WR450 - Choke wont stay open


6 replies to this topic
  • going up

Posted April 23, 2016 - 07:05 PM

#1

I have a 2003 WR 450. When I pull out the choke it wont stay in the open position.  I took this off the carb and looked at it and really can't tell what is going on.  If looks like a compete assembly, is there any way to replace the o-ring in this?



  • Benhump

Posted April 25, 2016 - 05:08 AM

#2

It's not the o'ring that has failed it will more than likely be the internal retainer best off replacing the unit

  • patrack92314

Posted April 25, 2016 - 07:46 AM

#3

My 03 just did that . Just replace it and you are good to go . The rod has a dent and the black plastic has these 4 finger things that slip into the dent and hold it .

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Hypheriox

Posted April 25, 2016 - 11:36 AM

#4

Mine does it too. I just deal with it, only happens every now and then.



  • going up

Posted July 15, 2016 - 05:54 PM

#5

I replaced it and the new one works great

  • Rob_WR

Posted July 16, 2016 - 04:45 AM

#6

My 03 (just got it recently) does the same thing. What part do I need to purchase/replace? Cheers

  • going up

Posted July 16, 2016 - 05:19 AM

#7

The choke is a whole assembly, just unscrew it from the carburetor and you will see what you need. I bought mine off amazon

Edited by going up, July 16, 2016 - 05:20 AM.





 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.