yz426f sag



3 replies to this topic
  • Mr426f

Posted April 14, 2016 - 05:03 PM

#1

Im 6'5 approx. 350 looking for a rear spring for my bike to sit a little higher while riding! its a 2002 , the race tech they said 7.6kg i found a 7.0 will this work

 

http://teknikmotorsp...-267-x-7-0kg-mm



  • jwilson32

Posted April 16, 2016 - 06:22 PM

#2

Try Diverse Suspension. They carry a lot of springs and may have a stiffer one.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • defilmcrew

Posted April 24, 2016 - 09:50 PM

#3

From my own personal experiences with race tech, the spring they recommend are usually on the stiff side. You can try the 7.0 if they have a good return policy. Just check static sag and race sag with the spring installed and the measurments will tell you if you still need to go upon spring or not.

  • Mr426f

Posted April 25, 2016 - 11:01 AM

#4

Ok cool thanks





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.