wr450/yz426 fork spring guage/diameter

1 reply to this topic
  • dg400sm

Posted April 14, 2016 - 12:26 AM


is anybody able to tell me the thickness of the spring used in the standard wr450 2003 forks. i just pulled out the springs and they measured 4.8mm where as the fork springs i pulled out of my yz426 measure 5mm. i'd like to use the standard wr450 0.46kg/mm springs but have no idea how to work out which one i have

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • toten

Posted April 14, 2016 - 07:42 AM


I have a set of fork springs I was told were stock, I'll try to remember to put a caliper on them tonight. I'd count the number of turns as well, more turns means softer (for equal coil diameter, wire diameter).


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.