Front engine mount bolt


2 replies to this topic
  • beachman12

Posted March 02, 2016 - 06:52 PM

#1

Hey guys so Im in the process of putting my newly rebuilt top end back together and noticed I am missing the bolt that goes through the front engine mount.

Attached is the picture of the bolt and the mount it uses.

I was hoping someone could tell me the size/thread pitch/hardness of the bolt so I can buy one from a hardware store

Thanks in advance!

IMG_1220.PNG



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • JVP

Posted March 03, 2016 - 08:16 AM

#2

Go online or a shop and buy one from an OEM supplier.  Putting Hardware bolts on a motorcycle is sacrilegious.  If you are going to use hardware bolts, just buy anything that will fit.  Why worry about the size and pitch, because you are not worrying about strength and quality.



  • DRDP

Posted March 04, 2016 - 12:51 PM

#3

My connecting rod bent mine in a U, that bolt is cheap enough from Yamaha. What's your time worth driving all over to find one






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.