Brembo 4pot caliper with stock master cylinder


4 replies to this topic
  • jorgen_blok1

Posted March 02, 2016 - 09:45 AM

#1

As the title says.
Will the brembo caliper with 320 disc work well with the stock 11mm master cylinder.

Attached Thumbnails

  • 1456940721585.jpg


  • knuckleduster271

Posted March 02, 2016 - 12:13 PM

#2

As the title says.
Will the brembo caliper with 320 disc work well with the stock 11mm master cylinder.

using your stock dirtbike master is a bad idea and a waste of a good caliper.
If its a 4 pot brembo 13mm mc is the way to go.
If you want out cheap get a trx450r quad master cylinder.
They are 13 mm, come with a brake light switch already installed.
Very good mc for the $$.
I might have one laying around if your interested.
I upgraded to a radial mc on my bike but ran the trx for a couple years and it wasnt bad at all.


Heres some info on them if you wanna check it out.
http://supermotojunk...master-cylinder

Edited by knuckleduster271, March 02, 2016 - 12:47 PM.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jorgen_blok1

Posted March 02, 2016 - 01:50 PM

#3

using your stock dirtbike master is a bad idea and a waste of a good caliper.
If its a 4 pot brembo 13mm mc is the way to go.
If you want out cheap get a trx450r quad master cylinder.
They are 13 mm, come with a brake light switch already installed.
Very good mc for the $$.
I might have one laying around if your interested.
I upgraded to a radial mc on my bike but ran the trx for a couple years and it wasnt bad at all.


Heres some info on them if you wanna check it out.
http://supermotojunk...master-cylinder


Thnx a lot I'll look one up.
This way I can switch the intire brake system when switching to enduro wheels Instead of having to fit a 320 disc of switch calipers all the time.

  • knuckleduster271

Posted March 02, 2016 - 03:45 PM

#4

I just looked through my old parts- i still have it.
$35+ the ride and its yours-

  • jorgen_blok1

Posted March 02, 2016 - 11:49 PM

#5

I just looked through my old parts- i still have it.
$35+ the ride and its yours-


Well I'm from Europe so it's best to look one up over here




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.