Small light bar on 2014 yz450f?


8 replies to this topic
  • ttr230rider6

Posted March 01, 2016 - 04:14 AM

#1

I know that these new fuel injected bikes have so many extra amps or watts or whatever it's called to run something through the fuel injection system. How many is it? I'm just wondering if anyone has a small light bar on their yz450f that is just plugged into the efi system. No aftermarket stator or anything like that or a battery. And would I need a wiring harness or just run the wire straight to the plug? I seen a guy that lives near me that had one on his Kx450 that was just plugged into the fuel injection system. Thanks

  • Monk

Posted March 01, 2016 - 07:42 AM

#2

You have about 40w of available power. You can buy a plug and play lighting setup from BajaDesigns for about $250.

  • 00yzryder

Posted March 01, 2016 - 09:11 AM

#3

i run a cyclops light bar and i love it. mounts to my handlebars. im an 07 so i run a battery but if you have 40 watts available this draws 30.

 

http://www.cyclopsad...t-kit_p_14.html

 

pricey but i have crashed and it didnt hurt it at all.



  • josko

Posted March 02, 2016 - 02:40 AM

#4

Can anyone tell what is the correct plug/wire where you can get the power?

I know that some people have done that with crf. 

 

Thought that I could order one of these:

http://www.ebay.com/itm/301829731935



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DanielMerrick

Posted March 02, 2016 - 06:44 PM

#5

I run a 40w spot beam light bar, direct power from where the tuner plugs in and ground to chassis il take some pictures tomorrow, if you search on snow west you can find a few how post on how to do it

Edited by DanielMerrick, March 02, 2016 - 06:56 PM.


  • DanielMerrick

Posted March 02, 2016 - 06:46 PM

#6

ImageUploadedByThumper Talk1456973172.583792.jpg

  • Monk

Posted March 02, 2016 - 06:50 PM

#7

I run a 80w spot beam light bar, direct power from where the tuner plugs in and ground to chassis il take some pictures tomorrow, if you search on snow west you can find a few how post on how to do it
ImageUploadedByThumper Talk1456973338.712618.jpg

80w? That looks like a 40w unit...

The link you posted in this thread is for a 40w light. The bike wouldn't run if it was 80w...

http://www.thumperta...t/?fromsearch=1

Edited by Monk, March 02, 2016 - 06:52 PM.


  • DanielMerrick

Posted March 02, 2016 - 06:56 PM

#8

80w? That looks like a 40w unit...

The link you posted in this thread is for a 40w light. The bike wouldn't run if it was 80w...

http://www.thumperta...t/?fromsearch=1


My mistake! I just double checked the 80w is on something els, good eye il edit my post

Switch
https://www.ebay.ca/...tm/371481246389
Light
https://www.ebay.ca/...tm/221994641746

(In no way I am affiliated with theses sellers)

  • DanielMerrick

Posted March 02, 2016 - 07:09 PM

#9

http://www.snowest.c...0f light&page=2







Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.