Loose Spokes

3 replies to this topic
  • DPW

Posted March 11, 2002 - 03:33 AM


What would cause the spokes in my rear wheel to loosen up after every ride ? I figured I had a couple of spokes to tight so I loosened all the rear spokes and attempted to get them the same tightness. That seemed to work for maybe a month, but now I'm back to tightening them after every ride.

  • #302

Posted March 11, 2002 - 11:58 AM


The spokes are the part of my bike that i tend to forget about the most. They naturally tend loosen after several rides. The best way to check the spokes is to lightly tap the spokes with a spoke wrench and adjust by sound.
On friday i went riding at a nearby practice track and i broke two spoke nipples on my rear wheel. (cased the jump) All the shops that i visited for replacing the spokes and nipples told me that they don't sell the spokes individually. :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • John_Lorenz

Posted March 11, 2002 - 03:23 PM


This is a very little known fact, Spoke Loosen ?

I suggest this, This is a old hat trick I lerned from some ol time riders some years back it has never failed me.

If needed get the Rims trued up, pay the bucks have them done by a pro. Once you have the buggers back on the bike Zip tie each spoke where they cross over each other. This eliminates vibration and tightens the spokes up just a bit. Also as noted earlier, Learn to tone the spokes meaning once the rims are trued up learn the tone they make when dragging a small screw driver accross them a loose spoke will sound completely diff.

  • grashoper250

Posted March 11, 2002 - 06:50 PM


Safety wire works better than the ziptyes E-hole mentioned, it works though. It stiffens the wheel up quite a bit. Safety wire pliers are a must have for this job, it's too tedius without them. You will still have to check your spokes after every ride.

Related Content


Help with 2000 yz426 by weekend woods racer

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  36 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.