Who has the Pro Billet rack, 2003-2006 WR450?

5 replies to this topic
  • ftl900

Posted February 09, 2016 - 03:40 PM


I know of someone that's making a billet rack system for several bikes and I like the looks and functionality of his rack.  


If anyone has a PB rack and is willing to trace the outline of the support brackets (both brackets, unless they're both the same depth and dimensions) then and he'll be able to make a complete rack for me...  and others.  


I like the looks of the rack much better, and appreciate the versatility as well as the lower price point- under $150 and it has Rotopax and Givi Monokey cutouts so you can bolt on the lugs and gain additional functionality


He's currently making these for the WR250R/X, DR250/360/650, DRZ400, CRF250, KLX250, and I'm hoping for the WR450 if I can help him get the bracket design.  I'm also working with him on the pattern for a 2001-2007 Bandit 1200, I have that rack at home so we're working on the dimensions.





  • rah7777777

Posted February 14, 2016 - 08:08 PM


I have an 06 WR450 that really needs a rack. I'm very interested in hearing what he comes up with. I don't like the 2 versions I know of that are out there currently. I want it to have 4 mounting points, the cheaper version I know of only has 3 mounting points.

  • ftl900

Posted February 15, 2016 - 07:59 AM


2006 is still steel frame, so your mount points and mine should be exactly the same as on my 2003.  

This guy will custom-make the rack if we can tell him where the mount points should be.   I'm not a fan of the round tube racks, there's one on ebay for $80 with THREE mount points  (really?) but I think this rack looks and works much better.  The difficulty is creating a template that he can go by to make the side rails.


I haven't looked closely at my 450 while it's taken apart, but it looks like it uses the seat mount bolts, and another mount point that's 2/3 of the way down the subframe..


I think I'm going to begin making a template with cardboard.  I may even cut it into light aluminum... cut a very rough outline of the rail, and mark or drill where the mount points should go.  That will also keep me true to any offset issues or concerns.  The better I can make a template, the better he'll be able to create the side rails.


(He lives in a different state than I do, so things have to be mailed back and forth.  It's not like he can just measure my bike.)


His website is http://www.scaggsmot...todesigns.com/  and he has racks already available for other bike models.

Edited by ftl900, February 15, 2016 - 11:17 AM.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • rah7777777

Posted February 15, 2016 - 06:44 PM


I really like the look of those!!

The 4th mounting point requires some drilling on the bike but I'm cool with it.

I have the YZ fender (tail light under fender, versus stock 03-06 where it's on top of fender.)

I'd love for one to hug the top of the fender closely to help avoid my boot hitting it while getting on or off.

I hope you guys get something worked out. Looks like most of his prices are around $130. I think that's pretty fair.

  • rah7777777

Posted February 21, 2016 - 07:07 PM


Any updates?

  • ftl900

Posted February 22, 2016 - 11:35 AM


Nothing yet.. he's hoping to get a local bike that he can look at and measure.  

Every time I take my bike apart,I forget about measuring for the rack until after it's put back together.   s-l64.jpg

Edited by ftl900, February 22, 2016 - 11:36 AM.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.