2016 YZ 450fx breather hose- how is it routed?


No replies to this topic
  • Edge316

Posted January 10, 2016 - 10:37 PM

#1

 I was looking at a 2016 YZ450fx the other day and noticed the breather hose doesn't hang off the side like on my 2016 YZ450f.I cant tell for sure how its routed, but looking at the parts break down on a yz450fx  it appears that the 450fx uses a short breather hose that comes off of the valve cover and then  connects to a 90 degree fitting that is connected to the air boot.It appears to be routed the same way as some people on TT have routed their breather hoses on the 14-16 yz450f. If you own a 2016 450fx would you please verify if what I mentioned is correct?....thanks! 


Edited by Edge316, January 10, 2016 - 10:39 PM.






Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.