2016 YZ450FX.... Can it be made street legal?(except CA of course)


9 replies to this topic
  • stevemorgan728

Posted December 29, 2015 - 10:29 AM

#1

I'm about to pull the trigger on the new FX, but I need to be able to make it street legal in Nevada.  It's got to be do able with the eletric start system right?



  • bigcozzybear

Posted December 29, 2015 - 10:49 AM

#2

I'm not sure about the US, but here in Australia you can buy them with a rec reg kit fitted

  • KennyMc

Posted December 29, 2015 - 12:07 PM

#3

Well it can be in AZ

  • Chas_M

Posted December 29, 2015 - 01:45 PM

#4

Should be no problem in NV as long as you have a NV address to use.

  • RockerYZWR

Posted December 29, 2015 - 07:22 PM

#5

Well it can be in AZ

My plan exactly.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • philfell

Posted December 29, 2015 - 09:29 PM

#6

Go to the nevada dmv site and it'll tell you the requirement to make it street legal, it's pretty simple, I know guys with two strokes that are plated in Nevada.

Basically put a light kit, with turn and brake signals, dot tires, take it to a shop and have them inspect it, take that paperwork to the dmv and get your plate.

  • grayracer513

Posted December 30, 2015 - 07:14 AM

#7

The FX has the same basic electrical system at the core that the EFI WR does, just less to the harness.  For that matter, so does the EFI YZ450.  Just a matter of tapping into the 12v DC section and adding on.



  • stevemorgan728

Posted January 09, 2016 - 03:08 PM

#8

Thanks Grayracer....  that's what I was looking for :ride:



  • Not sponsored

Posted January 09, 2016 - 04:39 PM

#9

The FX has the same basic electrical system at the core that the EFI WR does, just less to the harness.  For that matter, so does the EFI YZ450.  Just a matter of tapping into the 12v DC section and adding on.

Do you know if the WR head/tail light will plug right in on the FX somewhere or would I have to make my own harness?

  • grayracer513

Posted January 09, 2016 - 04:46 PM

#10

No idea.  I would bet there's no connector on board.  







Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.