Rekluse Users... How do you fine tune?


21 replies to this topic
  • Drenmaster

Posted January 02, 2016 - 03:32 PM

#21

Are you sure you have the correct number of Oem steels and friction plates in. I installed my rekluse today and didn't have to take out any where near that amount cable to get it adjusted properly.

I'd recheck the number if plates and make sure you don't have one too many.

I removed the CORE EXP but i checked  the number of plates and frictions discs, everything was correct. 



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Drenmaster

Posted January 02, 2016 - 03:36 PM

#22

You may just have the idle RPM set a little too high. Mine will slightly tug at idle, but only when the oil is cold, not hot. Drop the RPM just a bit and see if that helps, then I agree after that adjust the gain to reduce the tug with the clutch in and revving the engine. But... with the engine oil hot. Also, does the clutch cable adjustment look better now with some slack at the clutch lever? Sounds like you're getting there.

I just pulled the CORE EXP and went back to the EXP. I could just not get the pressure plate setting correct, and having to pull the cover everytime to adjust gets old really quick. Once i just put the EXP back in everything worked just fine. 







Related Content

Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.