(keszke w meszke project) yz450 namura tuning set


13 replies to this topic
  • tlenek12

Posted November 12, 2015 - 01:27 PM

#1

hello guys.
i just wonder to ask you , owners of yz450 - do you have
any experience with "Namura" company (pistons, cranks, rods, cylinders)
did this parts are recomendet? how engine will change? much more power?

  • grayracer513

Posted November 12, 2015 - 01:57 PM

#2

I haven't seen that brand name here in the states.  If they're from China, forget about it.  The name looks more Japanese to me, but I don't know. 

 

There is nothing about any of those parts that will give the engine more power unless the engine is currently worn out so that it needs those parts replaced.  The only exception might be the piston.  If the piston you are considering is a higher than stock compression piston, then you will probably gain a small amount of low and middle speed power, but not a lot.

 

My personal recommendation is Yamaha original equipment parts. 



  • knuckleduster271

Posted November 13, 2015 - 12:39 PM

#3

Ive had two of their head gaskets blow in one season. I bought one of their top end gasket sets off eBay for around $30 with valve stem steals.
The first one I thought was my fault, so i had the head resurfaced- 2 months later blew again... Went back to oem gasket and the problem was solve.
After that experience with the gaskets I'll pass on anything with their name on it.

  • tlenek12

Posted November 13, 2015 - 02:07 PM

#4

grayracer513
---Since 2001 Namura Technologies has been on a quest
for global domination of the powersports aftermarket. Based in Minnesota, USA

(cant belived , you ; I haven't seen that brand name here in the states.
If they're from China, forget about it. The name looks more Japanese to me, but I don't know. )-- its big COMPANY!

http://www.namura.com/index.html

  • tlenek12

Posted November 13, 2015 - 02:09 PM

#5



  • grayracer513

Posted November 13, 2015 - 02:16 PM

#6

Ive had two of their head gaskets blow in one season. I bought one of their top end gasket sets off eBay for around $30 with valve stem steals.
The first one I thought was my fault, so i had the head resurfaced- 2 months later blew again... Went back to oem gasket and the problem was solve.

 

That's the way to pursue world domination, alright. :facepalm:

 

Now I know why I never heard of them.  I almost never buy on price.



  • tlenek12

Posted November 13, 2015 - 02:16 PM

#7

i know, my 2 years old son will hit stronger than her, but anyway
i would like her to hit me same in a bed :D ahahahahahahahah

Returning to the topic : ahahhaahah
......

what about Namura piston set?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tlenek12

Posted November 13, 2015 - 02:18 PM

#8

That's the way to pursue world domination, alright. :facepalm:


whats that mean?

  • knuckleduster271

Posted November 13, 2015 - 02:19 PM

#9

They have a long, long way to go imo if they're trying to dominate this industry. I wouldn't use any of their junk even if it was given to me..

  • grayracer513

Posted November 13, 2015 - 02:38 PM

#10

That's the way to pursue world domination, alright. :facepalm:


whats that mean?

 

It's sarcasm.

 

"The bitter taste of poor quality lingers long after the sweetness of a low price has passed"  ~Benjamin Franklin



  • tlenek12

Posted November 13, 2015 - 02:42 PM

#11

"how are dumb what you like then you like what you have" ~ Lysy z Szewy

  • grayracer513

Posted November 13, 2015 - 03:10 PM

#12

Whatever that says...

 

Didn't translate very well, it would seem.



  • grayracer513

Posted November 14, 2015 - 02:46 PM

#13

I bought one of their top end gasket sets off eBay for around $30 with valve stem steals.
.


Now I know why I've never heard of them. I probably have seen their stuff and their name, but I reflexively ignore impossibly inexpensive knock-offs by companies, especially those with unfamiliar, oriental brand names.

  • camman

Posted November 28, 2015 - 06:58 AM

#14

Namura is a trading company out of China/Minnesota. They know nothing about engines or quality and only purchase from low cost suppliers. Avoid at all costs.





Related Content

Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.