2014 YZ450f clutch basket replacement


4 replies to this topic
  • dunesdude

Posted November 09, 2015 - 11:12 PM

#1

Hello,

 

I recently discovered that my clutch basket is worn out , and i thought i would replace it with a hinson or wiseco clutch basket my main question is will an aftermarket cluch hub with with all the stock components (inner hub,plates,springs,etc) or would i need to replace all clutch components to aftermarket, the oem doesnt sell the clutch hub alone in comes as a whole component so for the same price i could just get a stronger after market if it fits

 

20151110_101507.jpg
 
20151110_101553.jpg
 
yamaha_clutch.jpg
 
 
thank You,


  • grayracer513

Posted November 10, 2015 - 08:23 AM

#2

The driven gear assembly is not the "clutch hub".  That would be the clutch boss, #5 in your picture.

 

Aftermarket baskets use the OEM driven gear and cushion assembly, and in order to replace it, you need to drill off the heads of, and drive out the OEM rivets that hold the basket to the gear.  The new basket is bolted in place with bolts that are supplied.  USE RED LOCTITE. 

 

It is also necessary to press out the kick start drive gear from the basket, and press it into the new one.  Just a small press is needed, and you can get around having to have one for the installation by using a little heat and a bolt, nut, and a pair of large washers or plates. 

 

The aftermarket baskets will accept all of the remaining OEM clutch parts.  



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • GHILL28

Posted November 10, 2015 - 09:31 AM

#3

How many hours did you get out of it?



  • dunesdude

Posted November 10, 2015 - 10:42 AM

#4

Thank you for your response and help , i meant the clutch basket and not the hub the hub is fine just the basket is worn out and needs replacement as for the Hours  i Have 55 hours on the meter but i never ride track  only use it for the desert/dunes



  • Trapper john

Posted February 27, 2016 - 05:05 AM

#5

Anyone know if the cusion assembly can b purchased separately and where could I buy it





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.