Top mount Scotts stabilizer - what bar mounts?


3 replies to this topic
  • RockerYZWR

Posted October 11, 2015 - 10:43 AM

#1

What bar mounts do you guys run with a top mount Scotts set up?  The stock WR bar mounts are 1-1/4" (from triple clamp to bottom of bar) and the stabilizer arm ends up being about 1/4" too high above the frame mount.  The YZ250 has 1" mounts and it works great on there.  Weird that it doesn't fit...the frame mount is on correctly, but either the post needs to be longer, or the bar mounts need to be shorter.  Anybody run into this issue?

 

This is what I was looking at: http://www.protaper....l-rubber-mounts

but it says they're not compatible with Yamaha or Suzuki - seems strange because they look like they'd work.



  • Krannie McKranface

Posted October 11, 2015 - 11:14 AM

#2

You can get longer pins to reach your stabilizer



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RockerYZWR

Posted October 11, 2015 - 02:16 PM

#3

Thanks, I'll Scotts on Tuesday.



  • bobpara

Posted October 17, 2015 - 10:01 AM

#4

There is the 'above' and the 'sub' mount

One mounts above the crossbar and makes it easy to get to the knobs

The sub mount makes it harder to fiddle with the knobs, but propects it a bit better in case you do a major endo






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.